awg-quick prefers the host kernel module and only falls back to
amneziawg-go when `ip link add ... type amneziawg` fails, i.e. when no
module is installed at all. On a host carrying an older module (the 1.0.x
line the Amnezia PPA still ships) the interface is created, `awg setconf`
then rejects the AWG 3.1 keys with a bare "Invalid argument", and
awg-quick deletes the interface again. The install reported success and
no tunnel existed (issue #113).
The container's amneziawg-go does speak the full 3.1 key set, so awg3 can
run in userspace on such hosts:
- patch awg-quick in the built image with a WG_FORCE_USERSPACE switch;
without the variable set add_if behaves exactly as before, and a
grep guard fails the build if upstream changes the line
- probe the module from the awg3 start script (creating a throwaway
interface also loads a module that is on disk but not loaded yet) and
force userspace when its major version is below 3; the decision is
taken on every container start, so a later module upgrade returns the
tunnel to the kernel datapath on its own
- report the downgrade in the install log, and mark such lines as
warnings in the UI instead of green ticks
- verify the interface is actually up after the start script, so a
rejected config surfaces as an error with the container log instead of
a successful install
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The QR never scanned, before any of this branch's changes: qrcode.js paints
the modules edge to edge with no quiet zone, and against the dark page the
finder patterns sit directly on the background. Simulating a 640x480 capture,
nothing decodes that way -- not the frame series, not the raw config, at any
size. With a 32px white frame around the code all eight frames decode at every
scale tried. So the earlier density work was necessary but not sufficient.
Rounding is dropped from the code itself as well, since a border-radius large
enough to see clips the corner finder patterns.
The card header now carries the protocol name next to its icon, and the
control buttons get a row of their own underneath, where three of them fit
without crowding anything.
Button labels rode high whenever the label opened with a symbol glyph: U+23F9
in the stop button falls back to a font with much taller metrics, which grows
the line box downwards. A fixed line-height keeps the label centred.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two problems with the previous commit's UI.
The header row of a protocol card is a bare space-between flex with no gap,
so the third control button ran straight into the protocol icon on the AWG
cards -- the only ones that get an AWG button. Give the row a gap and let the
button group wrap instead of pushing into the icon.
And the QR: a whole config in one code lands at version 19 raw or 26 wrapped,
while the Android scanner builds ImageAnalysis.Builder() with no
ResolutionSelector and so reads 640x480 frames -- two to three pixels per
module. Emit the frame series ImportController::parseQrCodeChunk reassembles
instead: qint16 magic 1984, quint8 total, quint8 index and the slice as a
QDataStream QByteArray, each frame base64url'd into its own code. At 144 bytes
a frame every code stays under 55x55 modules and decoded at every scale tried
against a simulated VGA capture, including ones where the single code failed.
The WireGuard format stays a single static code, since a raw config is what
AmneziaWG and wg-quick read and it cannot be chunked.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A plain WireGuard config cannot carry a name: extractWireGuardConfig() in
the client overwrites description with nextAvailableServerName(), so every
imported key lands as "Server 1". Wrap the config into Amnezia's own server
config format instead, which keeps whatever description it is given, and
name it after the node and the container it came from -- "prx-40 AWG3".
The encoding matches ExportController::generateVpnUrl: base64url of
qCompress'd JSON, the size prefix included. The QR payload carries no
vpn:// prefix, because extractConfigFromQr() feeds the scanned text
straight to QByteArray::fromBase64, which drops ':' and '/' but keeps
'v', 'p' and 'n' and would shift the whole payload by three characters.
AmneziaWG and wg-quick only understand the raw config, so the QR panel
gets a format switch rather than replacing what it shows. The named
payload is about half again as long -- QR version 23 instead of 18 --
so it is drawn a little larger.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
On a panel with a few dozen users, picking one when creating a connection
means scrolling a plain <select> and reading every entry — there is no way
to type a name.
Adds a small dependency-free searchable select and applies it to the user
picker in the Add Connection modal. It's progressive enhancement: the
native <select> stays in the DOM as the source of truth, so `.value`,
programmatic assignment and `change` listeners keep working exactly as
before (server.html reads `connectionUserId.value` unchanged).
- static/js/searchable-select.js: opt-in via `data-searchable`, with
case-insensitive substring filtering, keyboard navigation
(arrows/Enter/Escape/Tab), an empty state, and ARIA combobox roles
- styles built entirely from existing CSS variables, so light/dark themes
and RTL follow the rest of the panel
- labels come from `data-search-*` attributes, so strings stay in the
templates; new keys added to all five locales
No jQuery/select2: the panel ships no jQuery today, and pulling in two
libraries for one dropdown seemed a poor trade against ~300 lines of
vanilla JS.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Count conntrack entries per peer IP from /proc/net/nf_conntrack (no extra
packages on the host), matching against the instance subnet
- Record a warning when a peer exceeds 600 simultaneous connections,
at most one per hour per peer, keeping the last 5 events; persisted in
conn_warnings.json inside the container data dir (volume-backed)
- Render warnings under the client meta row (.conn-warnings/.conn-warning,
no inline styles), localized via new conn_warning_text key (en/ru/fr/fa/zh)
- Show peer internal IP next to the client name (.client-ip)
Uses clientIp/allowedIps already present in the API response. Also
fixes the rename editor picking up the IP text together with the name
(saving produced 'Name 10.x.x.x 10.x.x.x').
The install dialog gains an AmneziaWG section, and installed AWG
protocols gain an "AWG" button next to the raw config editor that opens
the same fields for editing. A "Default" button fills I1 with the packet
the desktop client uses, so the common case is one click.
AWG Legacy predates special junk packets, so it only gets MTU and DNS.
The dialog says outright that changes apply to configs generated from
now on: a client that already imported a config keeps its old values,
because the values live in the config it holds.
fr/zh/fa strings are machine-written and want a native reader.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Add SOCKS5 support
Add AdGuard Home integration
Add node status and latency tracking
Add drag-and-drop server management
Upgrade Xray from v1.8 to v26.3.27 with backward compatibility
Fix Telemt dependency installation
Extend Telegram bot to support all protocols
Improve server cleanup process
Enhance API structure (system routes moved to a separate group)
Add JWT token generation for external integrations
* Added support for AmneziaDNS
* Added traffic reset functionality
* Fixed hideConnectionsSection is not defined error and false “Connection Error” when clearing the server
* Added basic management features (restart, delete, poll, clear)
* Fixed AWG 2.0 connection generation
* Optimized Check Server polling speed (now queries all protocols and services in parallel over a single SSH connection; ~5–6x faster)
hell